Actions
Support #307
open
TSYS HQ Facilities Punch List
Added by Charles N 2 months ago. Updated about 10 hours ago.
Start date:
08/02/2025
Due date:
08/03/2025 (Due in 16 days)
% Done:
70%
Estimated time:
Description
Art room¶
- Get OpenScan 3d scanner power supply located and paired and the system on-net for use (power supply adapter ordered)
- Inventory art room
- Re-hang art room door
Server room¶
Complicated/involved¶
- (in progress) Figure out how to get all five Ultix hard drives showing up (only 3 show up currently) (need to play with BIOS/controller bios settings)
- (in progress) Plug in hard drive bay to tsys1 to pull Axios and other data from old file server (plugged in, dmesg complained, need to investigate)
- Deploy environmental and security sensors in server room (in progress)
- Finish deploying (zwave/zigbee/proprietary) sensors (temp / humidity / door / window / alarm keypads) in server room / elsewhere
- Badge control server room door
Simple¶
- Plug in last two server power cables
- Ensure the switch ports with the Dell Server secondary ethernet interfaces are set to storage vlan
- max out ram on the best two or three Dell servers (r series) and get idrac configured so the servers can be used for RackRental / STL
- Add trim to server room door
- Add stop to storage room door
Garage¶
- Get Suboi5 online
- Inventory tools/equipment/machines
- Deploy cable runners on floor
- Fix aircon vent hose connection to garage wall vent
- Assemble, deploy and use TDS tester to test de-ionizer
Files
| 580c18039de7fb78.png (424 KB) 580c18039de7fb78.png | Done today | Charles N, 06/18/2025 01:22 AM | |
| da7c0d096c6e24ba.png (418 KB) da7c0d096c6e24ba.png | Last nights sprint update | Charles N, 06/19/2025 07:40 AM |
Updated by Charles N 2 months ago
ยท Edited
- Description updated (diff)
Completed so far
Also see my mastadon posts for screenshots as I check off things in Apple reminders from the punch list. Not a perfect 1:1 with here, i try to keep it synced.
- Install and connect to coresw tsys1 storage network USB3 Gigabit adapter
- Install and connect to coresw tsys2 storage network USB3 Gigabit adapter
- Deploy desktop switch onto art room cabinet
- Deploy USB hub on art room cabinet and cable up devices and cable hub to laptop
- Move unifi ap uplinks to coresw
- Plug in dev board USB connections to ultix
- Balance server room loads across the two UPS units
- Move tsys1 / external hard drive to it's production location
- Plug server room UPS monitoring USB cables into tsys1
- Get zwave radio/network setup in pfv-bms
- Get zigbee radio/network setup in pfv-bms
- Get tsys-ca VM working
- ssh audit/harden ( https://github.com/jtesta/ssh-audit?tab=readme-ov-file#web-front-end )
- Forward/reverse DNS for all hosts
- Syslog working for all hosts
- Finalize dhcp client config to remove name servers/search domains
- Adopt Unifi APs to unifi controller on tsys2
- Qualify all hard drives (in progress)
- Plug in UPS1 USB cable to tsys2
- Plug in UPS2 UPS UPS UPS cable to tsys2
- Label all tsys2 external hard drives with matching names on the drive and in Windows
- Qualify lead acid cells in garage
- Validate r1,r2 switch daisy chaining to Cisco 2800 lan port
- Move tsys2 from garage
- Factory reset Cisco 2800
- Flash pi avionics units
- Flash pi server room door controller / NTP unit
- Deploy unifi controller on tsys2
- Uninstall all apps from tsys1 external hard drive and setup for new user id/ownership
- Deploy stick cams for external surveillance
- Flash subopi units
- Deploy Govee units (garage and art room )
- Get downstairs entertainment area on network
- Move tsys1 to art room
- Create email alias for home automation account
- Get govee units back online
- Deploy stick cameras
- Replace batteries on all sensors
- Get LED strips online in server room racks
- Cable manage usb/power in RF shelf of R&D rack
- Clear out extra RackRental items to storage
- Put long VGA cable in server room from KVM in rack to monitor on desk
- Replace EE bench camera VGA cable with medium length cable from server room
- Finish software install on stlpc-artroom-workbench
- Install and connect r&d stor storage bond (ports 20-23) to core storage bond (ports 13-16)
- Install ethernet four port gigabit NIC into ultix
- Deploy Home assistant VM on stlpc-garage-ee
- Install and connect to core sw ultix storage bond (ports 13-16) 4 port intel nic into Ultix
- Get wii video output working
- Cable management in server room
- Deploy all clean room fabrication capabilities (CNC,laser,3d print, sewing, embroidery, leather working, stamps etc)
- Plug in video for second monitor in garage
- Get upstairs receiver mounted above couch
- Get upstairs speakers positioned and and wired / cable managed to receiver
- Connect fire stick video out to receiver hdmi in and projector video in to receiver hdmi out
Updated by Charles N 2 months ago
- Blocked by Support #167: Small UPS Units Re-build added
Updated by Charles N about 2 months ago
- Target version set to Physical Build Out - VpTechops
Updated by Charles N about 1 month ago
- Due date changed from 05/31/2025 to 06/30/2025
Updated by Charles N about 10 hours ago
- Start date changed from 05/12/2025 to 08/02/2025
Actions